Fi Controller Software Installation Guide

Fi Controller Software Installation Guide

Step 1: Download and install the Fi App from the Appstore or Play Store
Step 2: Open the App and click Setup New Device
Step 3: Select Fi Controller
Step 4 : Find your  Linkcode on the Fi Controller
On your Fi Controller click Settings -> Administrator Settings -> Enter Passcode ->  Link Code
The Default Passcode is 1234
Step 5: Enter your Linkcode

 

Step 6: Enter Your Login
The Default login is admin/admin. Make sure to change that later.
 

 
Step 7: You can now use the app to control your garage but first lets calibrate the sensor. Click on the menu on the top left.
Step 8: Calibrate the Door Sensor by clicking on Admin
Step 9: Click Calibration
Step 10: Click Yes
Step 11: Now Wait, Your garage door will open and close a few times. Then you will see Calibration Completed
Step 12: You can now use the app to control your garage